ARAG Explorer 46701801, Инструкция по установке, эксплуатации и обслуживанию

Страница: 17 / 60

17
MODE
GB
SWITCHING ON
• Starting the device
First, the
L2
LED (Fig. 13 ) indicates that the device is operating.
1 repeated flash of
L2
LED: start in A-NET mode.
2 repeated flashes of
L2
LED: start in ISOBUS mode.
• Operation test
Once the device has started, the joystick runs an operation test in the following manner:
simultaneous illumination of all LEDs, backlit keyboard and 1 long vibration.
The device enters the “Main” page functions and triggers the following signals.
Refer to the “Signals: LEDs and vibrations” paragraph for your mode.
SIGNALS: LEDS AND VIBRATIONS - ISOBUS MODE
Fig. 13
• Press active keys
The device vibrates (1 short vibration) when any button is pressed.
LED no. LED STATUS VIBRATION
L1: PAGES 1 / 1 bis
L1
- steady on : page 1 ONLINE 1 vib 1 pause
- consistent flashing : page 1 bis ONLINE 1 vib 1 pause
- off : Main page ONLINE none
- off : page 2 ONLINE 2 vibr 1 pause
L2: ALARM LEDs
L2
- off : Object Pool * loaded correctly, ISOBUS operation correct none
- 1 periodical flash : initialization none
- 2 periodical flashes : Object Pool * loading in progress none
- 3 periodical flashes : Object Pool * loading failed none
- 4 periodical flashes : corrupt memory, formatting in process none
L3: PAGE 2
L3
- steady on : page 2 ONLINE 2 vibr 1 pause
- off : Main page ONLINE none
- off : page 1 / 1 bis ONLINE 1 vib 1 pause
L4: CENTRAL BUTTON STATUS
L4
- steady on : associated function ON none
- off : associated function OFF none
LEGEND:
-
consistent flashing
= constant flashing
- periodical flashing = set of several flashes separated by pauses
* OBJECT POOL: joystick software loaded on the Virtual Terminal