ARAG Bravo 180S Series, Руководство по установке, использованию и техническому обслуживанию

Страница: 31 / 42

31
13 USE
13.1 Display
32.1 GPA ƒ <
S 7.58 MPH
M
10%
<
M
Tank level lower
than the set reserve
MANUAL
operation active
AUTOMATIC
operation active
Speed simulator active:
the corresponding value is
indicated on the right of the symbol
Operating data displayed during treatment:
speed, pressure, flowrate, surface, sprayed fluid, tank level, time, distance
Percentage variation according to the
set output value
Output value during treatment LEFT side of the active foam marker
Active pendrive
RIGHT side of the active foam marker Disabled spraying
>
A
32.1 GPA
Master OFF
Fig. 78
13.2 Controls on computer
Fig. 79
Fig. 80
Legend:
1
Keys to check the computer and the spraying phases
2
Operating switches for control unit valves
3
Switches to use the hydraulic functions
13.2.1 Keys to check the computer and the spraying phases
Change value
of output
*
LEFT
Foam marker
Data confirmation
Data decrease /
browsing
Data increase /
browsing
ON/OFF
Quit
data modification
RIGHT
Foam marker
Manual / Automatic
Output
*
It allows resetting or setting the increase/decrease percentage of the output value.
13.2.2 Operating switches for control unit valves
Upon computer switching on, if main control is set to ON, the message Disable Main will be displayed:
no function can be accessed until main control is set again to OFF.
Main control ON Main control OFF Open section Closed section
Increase
of output
*
Decrease
of output
*
*
Manual function: increases/decreases the quantity of fluid to be sprayed;
Automatic function: increases/decreases the quantity of fluid to be sprayed at intervals of 10% with respect to the set value.
13.2.3 Operating switches for hydraulic valves
Release
of the boom
Block
of the boom
Leveling
of the boom
clockwise
Leveling
of the boom
counter-clockwise
Increase
of the boom height
Decrease
of the boom height
Boom section
movement:
opening
Boom section
movement: closing
The LED turns on when one of the possible sprayer movements is activated.
Keep the relevant switch pressed to activate the movement. Release it to stop the movement.
USE