7
4
LOCATION ON THE MACHINE
4.1
Recommended system configuration
Assembly diagram for orchard sprayers - BRAVO 14x
2
1
A
S
B
15/54
+
-
+
12Vdc
Legend:
A
Control panel
B
Starter key
S
Speed sensor
US1÷US2
Ultrasonic
sensors
1-2
Section valves
4.2
Locating the monitor
BRAVO 14x series monitors must be installed in the cab of the tractor, in observance of the
following precautions:
- DO NOT install the monitor in an area subject to excessive vibration or collisions
as this may damage it or lead to its controls being accidentally actuated.
- Install the unit is a visible position within easy reach by hand: bear in mind that the
monitor should not obstruct the operator’s freedom of movement or block his view.
- Note the connections required for the monitor to operate (Table
3
), the required length
of the cables, and provide adequate space for the connectors and cable runs.
An identification symbol is located next to each connector to indicate its function;
for the configuration of the systems, refer to Par. 4.1 - Recommended system confi
-
guration.
160
40
ø 6
.5
60
124
1
2
Ok
Esc
ULTRASONIC CONTROLLER
Auto
Num.
Connection points
1
Control unit and Sensors
2
Power supply
Tab. 2
Tab. 3
