ARAG 520005, Инструкция по установке, эксплуатации и обслуживанию

Страница: 7 / 24

7
5.4 Installing tank and compressor unit
Tank and compressor unit can be installed onto the machine in two different ways:
5.5 Installing the foam markers
Install the foam markers at bar ends as specified below:
Horizontal foam markers
Fig. 6
Fig. 7a
1 Fix the compressor unit ( C ) to the tank
holder basket ( B ) and then install the
assembly onto the machine.
2
Install compressor unit (
C
) and tank
holder basket (
B
) separately.
Should this be the case, the compressor
and the basket can be directly installed
on the machine.
Always use the supplied screws.
• Drill two Ø 6 mm holes at a distance of 100
mm on bar (
A ).
• Fix the bracket ( B ) to the bar with the sup-
plied M6 screws.
• Repeat the operation with the other boom.