ARAG 520005, Инструкция по установке, эксплуатации и обслуживанию

Страница: 4 / 24

4
1 Product descriPtion
The foam marker transforms a mixture of foaming agents, added to clean water, into a foam that
can be seen on the ground.
The foam, which is inert, visually marks out previously treated areas of crop, thus avoiding double
treatments, product wastage and potential damage to the crop.
1.1 Intended use
Device designed for installation to crop-spraying, spraying agricultural machinery
and forestry machinery.
This equipment has been designed and manufactured in compliance with the fol-
lowing directives and standards:
• 2004/108/CE and subs. mod. (Electromagnetic Compatibility);
• 97/23/CE and subs. mod. (Pressure equipment);
• 98/37/CE and subs. mod. (Machinery);
EN ISO 14982 (Agricultural and forestry machinery - Electromagnetic Compatibility -
Test methods and acceptance criteria).
2 Precautions
• Foaming agents in general are potentially toxic!
• Only use the foam marker outdoor or in well ventilated environments wearing
the required individual protection gears, overall, gloves and mask.
• Never expose the equipment to water jets.
• Never use solvents or petrol to clean the external parts of the container.
• Do not use direct jets of water for cleaning the device.
• Comply with the specific power supply voltage (12 Vdc).
• In case of electric arc welding, make sure that the power supply to the device
is disconnected; if necessary, disconnect the power supply cables.
• Use only original ARAG spare parts or accessories.
3 identification
42048 RUBIERA (RE) - ITALY
Modello - Model :
Matricola n° :
Serial number : Anno
Year
Alimentazione - Power:
TRACCIAFILE
FOAM MARKER
Volt: 12
A: 9
00000/00
On all request for spare parts,
give the serial number and year
of manufacture of the foam
marker given on the identification
plate.
Fig. 1