Arada Aarrow, Руководство пользователя

Страница: 15 / 31

Aarrow Stove User Guide
On stoves with a riddling lever
at the front of the stove body,
push the control inwards.
On stoves with a riddling lever
to the side of the stove, lever
the control upwards.
2. Set the fire by using scrunched up newspaper and placing a layer of
dry kindling wood on top of this. The use of two or three fire lighters
may assist in lighting the kindling.
3. Fully open your air control(s) and light the fire.
4. After the kindling has caught light, you should almost close the fire
door leaving it ajar by about 20mm. This will aid flue draw during
the initial lighting of the fire.
5. The flue temperature and draw should be established after five
minutes, and the kindling reduced to form an ember bed. Carefully
load the stove with well seasoned wood and fully close the fire door.
6. After ten to fifteen minutes, close the primary air control and
regulate the airwash system to control the burn rate and maintain
clear glass, typically by reducing to approximately half open. i Series
stove owners can regulate the burn rate by adjusting the air control
slider between its fully open and fully closed (for wood burning)
settings.
7. Close the primary air control on non-i Series stoves as generally no air
from below the grate is required when burning wood.
5.3 Burning solid fuels
If you have an i Series stove please read section 5.4 on page 13 for
instructions on burning solid fuels in your appliance.
BK530 Rev11 11