Version: 20210708
27
8.
Select “Save” to save the configuration of detection zones.
Up to 40 points can be used to draw the detection zones. An individual zone must be minimum of 2% of the full
image. The sum of the detection zones must be at least cover 25% of the full image. If smaller zones are drawn, a
warning pop-up box will appear. Zones may overlap. For detection, the aggregated area is considered.
Configuring display options
To visualize Araani Fire Guard alarms inside the video stream, two options are available:
•
Adding text overlay that displays the Araani Fire Guard status.
•
Enabling overlay in the app to dynamically draw red bounding boxes around the incident zone.
VIEW ARAANI FIRE GUARD STATUS
The Araani Fire Guard app status is one of following:
•
OPERATIONAL: the app is running; no incident is detected, and detection conditions are ok.
•
FAULT: contrast or light level are not sufficient for proper smoke detection; flame is still active.
•
ALARM: an incident condition is raised, either smoke or flame is detected.
This status can be visualized in the video stream by using the Axis
camera overlay capabilities. To visualize the
Araani Fire Guard status on screen, follow these steps:
1.
Connect to your camera, using your internet browser software and login to the camera webpage.
Refer to the camera user manual on how to do this.
2.
Open the settings window by clicking the “settings” button in the bottom right of the camera webpage.
3.
Select the “
Overlay
” tab in the control panel.
6
7
8
