Version: 20220420
8
15
Housing power output connector
This connector is linked to the interface board power input. Do
not use or modify this connection.
16
Interface board
Interface board and alarm outputs.
17
Interface bord I/O connector
Connect external alarm wires from the power/alarm cable to
this connector.
18
Interface board power + RS485
connector
This connector is linked to the housing power output and to the
camera serial communications and power input. Do not use or
modify this connection.
Status LED behavior
Status LED
Indication
Unlit
Connection and normal operation.
Green
Steady green for 10 seconds for normal operation after startup completed.
Amber
Steady during startup. Flashes during firmware upgrade or reset to factory default.
Amber / Red
Flashes amber/red if network connection is unavailable or lost.
Red
Firmware upgrade failure.
