Version: 20220329
7
1
8-pins I/O connector is pre-mounted mounted inside the
camera on the interface board connector.
1
Screwdriver Torx T20
1
Torx bit T30
1
Spare cable seal + spare RS signal mating connector
Contact your supplier immediately if any parts are missing.
Product elements
#
Name
Function
1
Weather shield
Protects the camera window from weather influences and
bright lights (lamps, sun etc.).
2
Window
Transparent window in front of lens. This part may require
regular cleaning to guarantee proper image quality.
3
Intrusion alarm magnet
Works with #6.
4
Interface board
Interface board and alarm outputs. Connect alarm wires from
the power/alarm cable to this board.
5
IK10 tool
Tool that is used to position the optic body and lens. The optic
body and lens of the FireCatcher Camera are pre-aligned at
factory so no need to use.
6
Intrusion alarm sensor
Allows to detect opening of the camera housing.
7
Cable cover
Links the optic unit to the camera electronics.
