background image

 12 

I am charging the same type of battery. Why does one I Charger mA meter show a 
different value to the others? 
 
Batteries have an internal resistance. Think of this as a force attempting to stop current 
from flowing into the battery. Not all batteries have the same internal resistance. A 
battery with a lower internal resistance will take up charge more readily. I Charger uses 
individual charge circuitry for each charge port. Each circuit charges one battery. The com-
bination of battery internal resistance, connector and extension lead resistance may show 
as a higher mA charge into one battery when compared to another.  
 
I have noticed that the mA and charge current indication is still showing a small charge 
after the main charge is complete. 
 
This is quite normal. The I Charger has a special top up technology that will trickle charge 
a battery after the main charging is complete. What you are seeing is the trickle charge 
feature in operation.  

12 Month Replacement Warranty 

Advanced Radio will replace this product within 12 months if found to be defective in 
material and/or workmanship when used in the intended purpose. The warranty does 
not cover - Shipping charges related to any warranty claim. An over voltage or over 
current usage beyond stated specification. Damage due to system failure, negligence, 
abuse, accident, improper installation or freezing. Loss of time, inconvenience, loss of 
model, or other incidental or consequential damages. 

Содержание I-CHARGE

















Отзывы: