AR I-CHARGE, Быстрый старт

Страница: 9 / 16

9
Step 3
On the opposite end of the charger you will notice that there are three sets of black charge plugs
(three pin plug) and three sets of white temperature plugs (two pin plugs).
Plug the battery into the Black (three pin) charge port connector. You can plug your battery into
the bat pins either way as the centre is positive and both outside pins are negative.
This step can be done for each stack.
The TMP port can be used with the optional temperature sensor. These can be placed on the
battery to warn of excessive temperature.
Step 4
I Charger is supplied with an ultra male connector so you can connect directly to a 12volt
battery or a 12 volt DC power supply to start the charge process.
Please Note: If connecting to a DC power supply it must be able to supply 5A at 12volts DC.
When charging with a 12volt battery please ensure the battery is fully charged as the I-
Charger can draw up to 5A while charging 3 batteries.
Charger port
Temperature probe
port