AR 100S1G6AB, Руководство по эксплуатации и обслуживанию

Страница: 46 / 52

Model 100S1G6AB
30 Rev A
4.3.8 Low or No Power Output (RF Test) (Schematic 10038514)
NOTE: The DC Tests specified in Section 4.3.7 should be completed before conducting the RF tests specified
in the following sections.
1. The Model 100S1G6AB’s typical gain response at 0 dBm input and -20 dBm input is shown in Figure 4-
1. The actual gain may vary considerably from that shown in Figure 4- 1 but should be ≥ 47 at 0dBm
input and ≥ 0V at –20 dBm input. NOTE: If the overall gain is low, the amplifier chain can be separated
at the input of the A3 Splitter.
Figure 4-1. Typical Response at 0 dBm Input and –20dBm Input