AR 10041451 Скачать руководство пользователя | Manualshive

Страница: 3 / 56

background image

Declaration of Conformity

Issue Date:

Model #/s:

Type of Equipment:

Function:

December 2018

Model

250S1G6

Series

RF Broadband Amplifier

Designed to be used in a RF immunity test system or for research. The unit is intended

to amplify an RF signal and inject it into a load.

The equipment described above is declared to be in conformity with the following applicable national and international

standards. The conformity is valid only when equipment is used in a manner consistent with the manufacturer’s

recommendations and the reference documents.

EMC:
DIRECTIVE 2014/30/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 26 February 2014 on the

harmonisation of the laws of the Member States relating to electromagnetic compatibility

EN 61326-1:2013 Electrical equipment for measurement, control and laboratory use–EMC requirements–Part 1:

General Requirements

SAFETY:
DIRECTIVE 2014/35/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 26 February 2014 on the

harmonisation of the laws of the Member States relating to the making available on the market of electrical

equipment designed for use within certain voltage limits

CENELEC EN 61010-1 Issued 2010/10/01 Ed: 3

Safety Requirements for Electrical Equipment for Measurement Control and Laboratory Use – Part 1: General

Requirements

UL 61010-1 Issued 2012/05/11 Ed: 3

Safety Requirements for Electrical Equipment for Measurement Control and Laboratory Use – Part 1: General

Requirements
CAN/CSA C22.2 #61010-1 Issued 2012/05/11 Ed: 3

Safety Requirements for Electrical Equipment for Measurement Control and Laboratory Use – Part 1: General

Requirements
HAZARDOUS SUBSTANCES (RoHS 3):
DIRECTIVE (EU) 2017/2105 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 November 2017 on

the restriction of the use of certain hazardous substances in electrical and electronic equipment (recast)
RECYCLING (WEEE):
DIRECTIVE 2012/19/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 4 July 2012 on waste

electrical and electronic equipment (WEEE) (recast)
SUBSTANCES OF VERY HIGH CONCERN (REACH):
REGULATION (EC) 1907/2006 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 18 December 2006

concerning the Registration, Evaluation, Authorization and Restriction of Substances of Very High Concern Chemicals

(SVHC)

Supporting documentation is held by AR RF/Microwave Instrumentation’s Quality department in Pennsylvania, United

States.
Place of issue:

AR RF/Microwave Instrumentation

160 School House Road

Souderton, Pennsylvania 18964 USA

Authorized officer of the company:

Patricia Thrasher

Manager Quality, Customer Service, Purchasing

«
1
2
3
4
5
...
»

Содержание 10041451

























































Отзывы:

Нет отзывов

Похожие инструкции для 10041451

Бренд: NAD Страницы: 7

Бренд: NAD Страницы: 3

Syn Power 2.050

Бренд: Macrom Страницы: 26

Бренд: Warfedale Pro Страницы: 12

Бренд: PROEL Страницы: 39

Бренд: Genz Benz Страницы: 6

Бренд: Neets Страницы: 20

Бренд: Pyle Страницы: 1

Бренд: Pyramid Technical Consultants Страницы: 33

Бренд: Cyfre Страницы: 2

Бренд: Pro-Ject Audio Systems Страницы: 3

Бренд: B&K Страницы: 16

Бренд: Kole Audio Страницы: 16

Бренд: Classe Audio Страницы: 38

Бренд: zapco Страницы: 11

400 Prol Pro Head

Бренд: Fender Страницы: 20

Бренд: DaytonAudio Страницы: 14

Бренд: DB Drive Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды