AR 10036733, Руководство по эксплуатации и обслуживанию

Страница: 40 / 44

Model 30S1G6
4.3.8 Low or No Power Output (RF Test) (Schematic Diagram No.
10034509)
NOTE: The DC Tests specified in Section 4.3.7 should be completed before conducting the RF tests specified
in the following sections.
1. The Model 30S1G6’s typical gain response at 0 dBm input and -20 dBm input is shown in Figure 4-1.
The actual gain may vary considerably from that shown in Figure 4-
1 but should be ≥ 41.8 at 0dBm input
and
≥ 0V at –20 dBm input.
NOTE: If the overall gain is low, the amplifier chain can be separated at
the input of the A3 Quad Amplifier.
Figure 4-1. Typical Response at 0 dBm Input and –20dBm Input
24 Rev A