Aquos IS13SH, Основное руководство, Страница: 62 / 85

60
~ ~ ~ ~<MFZ>
is13sh_e_09.fm
[60/65]
Mu
lt
im
e
d
ia
IS13SH has a CMOS camera with approximately 8.04 effective
megapixels for shooting photos and movies.
•
All the photos and movies shot are saved in a microSD memory
card. Insert a microSD memory card before using the camera.
•
The mobile light flashes in red while each camera mode is activated.
•
If the camera lens is exposed to direct sunlight for a long time, the
internal color filter may discolor and it causes discoloration of shot
images.
•
The quality of images may deteriorate when shot or saved after the
IS13SH has been left in a warm location for a long time.
•
Although the camera are made of high-precision parts, some pixels
look constantly dark or bright. Further, blue, red, white dots, etc.
appear in images especially when shooting images in a very dark
place.
•
Fingerprints, fats, etc. on the lens may cause the images to blur.
Wipe the lens with a soft cloth such as cloths for cleaning glasses
before shooting images. The lens may be damaged if you wipe it
strongly.
•
Make sure that your fingers, hair, the straps of the IS13SH, etc. do
not obscure the camera lens when shooting images. If the straps
interrupt you when shooting images, hold the straps with your hand.
•
Be careful of camera shakes. Hold the IS13SH tight or use the
self-timer function since such shakes may cause the images to blur.
Be careful of camera shakes especially in a place without enough
light such as inside of a room.
Also, images may blur when the subject of the images moves.
•
Before shooting images, make sure that the subject is completely
displayed. If you shoot images while moving the camera, the images
may blur.
•
Indoor fluorescent lighting may cause flickers (too fine to be seen
with human’s naked eyes) to be detected and light fringes may be
displayed. This is not a malfunction.
•
When shooting images under incandescent lamps, the display may
become red. On the home screen,
[
Camera
[ [
White
Balance
[
Tungsten
to solve this problem.
•
Make sure that the microphone is not covered by your fingers etc.
when recording movies. Also, the quality of its sounds may
deteriorate depending on the voice volume and surrounding
environment during the recording.
•
The color and brightness of the subject of images shot with the
IS13SH may differ from the actual color and brightness. Because of
the characteristics of the lens, some part of the images may appear
dark or light depending on the subject and light ray while shooting.
Also, note that some part of the subject in the images may be
distorted due to the usage of wide-angle lens.
•
Purple lines and bars may be displayed on images while recording
strong light or shiny subject. This is not a malfunction.
•
When you subject the camera to strong impacts when shooting
images, the images may be out of focus. In such case, reactivate
the camera.
•
The following subjects may cause images to be out of focus.
･
Subjects with few contrasts such as solid color walls
･
Backlit subjects
･ Subjects reflecting light brightly such as shiny objects
･
Subjects with horizontal repetitive patterns such as blind
･
In the case when there are many subjects located at different
distances from the camera
･
Subjects in dark places
Using the Camera
Cautions for Using the Camera
is13sh_ue.book 60 ページ ２０１１年１２月１３日 火曜日 午前１０時１４分