8 - Production hydrogen water or H
2
inhalation
Important:
the device must be filled with drinking water before you press the start button.
-Press the start button for 3 seconds. A beep indicates the
start.
Blue light
turns on and you can recognize the
hydrogen production by the fine bubbles rising. The
production process takes
5 minutes
. If you press the start
button again briefly, the
20 min interval operation
starts
(5
min - 10 min pause - 5 min). Display purple
.
• If the light changes to
red
and flashes, you should
recharge
the device. During the charging process, the LED is
permanently red until a green light indicates complete
charging. You should not produce hydrogen water during the
charging process.
• Each production phase ends automatically. This can be
recognized by the LED going out and the bubble formation
being stopped. If you want to stop a running production, press
the start button again for 3 sec.
• For the
40 min. special operation for "Inhalation",
briefly press the start button again
during the "Purple" operating mode. The
green display
appears for 40 minutes, provided
that the battery is sufficiently charged.
• When you now use the nasal cannula, approx. 5 ml of H
2
gas per minute is added to
your breathing air. Recommended for power napping (midday nap) or while working at a
computer screen. However, therapeutic applications discussed scientifically to date
require inhalers of 100 ml/minute or more.
brie
fly
40 min.
3
Sec.
5 min.
briefly
20 min.