Aquavitro division 125, Руководство пользователя

Страница: 11 / 16

11
5. Check the Pump (G) monthly. The skimmer is designed with an external pump connected by
a compression ring. This allows for quick and easy cleaning of the Pump (G).
6. If salt or limescale deposits are present, it is recommended to clean the affected parts with
water and vinegar away from the aquarium sump.
7. Do not use detergents or solvents that could damage the product or be harmful to aquatic
organisms.
8. If the pump runs with the intake or impeller blocked for extended periods of time due to
debris or encrustations, it could cause irreversible damage.
9. The Filter Sock (M) and Sponge (I) should be cleaned by gently rubbing and rinsing every
1-2 weeks. Though replacement needs will vary, the Filter Sock (M) and Sponge (I) should
be replaced every couple of months.
Secondary Pump Configuration (optional)
O. Secondary Pump
P. Venturi Extension
Q. O-ring
R. Connecting Hose
The Secondary Pump Kit (sold separately) allows you to finely adjust the amount of water you
want to treat. The Pump (G) recirculates water and air on itself, reducing consumption because it
does not have to fulfill the task of loading the water, but is optimized completely for skimming.
The Secondary Pump Configuration (Recirculating) allows the adjustment of three parameters
independently:
1. Water flow rate to the skimmer is controlled by the Secondary Pump (O)
2. Foam level is controlled by the threaded rod on the Drain Tube (E)
3. Air flow to the skimmer is controlled by the air intake screw of the Air Silencer (F)
The Secondary Pump Kit consists of:
Figure 4