AquaVac TigerShark, Руководство пользователя

Страница: 11 / 20

11
MAINTENANCE
Clean the filter cartridge after each use:
• Place the TigerShark on its side. Release the bottom lid latches (6) (Fig. d) and remove
the bottom lid assembly (7) (Fig. e).
• Pull out the filter cartridge. Your filter is a three piece filter, Part #70100 - you may or may
not remove the elements for thorough cleaning. Using a garden hose with a spray nozzle,
pressure wash the filter elements to remove debris. Hold the filter elements as shown to
allow the debris to fall out (Fig. f).
• Wash the inside of the bottom lid.
• Replace the filter cartridge in TigerShark (Fig. g).
• Install bottom lid and slide latches in lock position.
• Filter cleaning solution can be used to remove D.E., excessive dirt and/or sand.
remember: The cleaner your filter is, the more efficient your cleaner will perform.
Periodic Cleaning of Moving Parts
warning:
Disconnect the power supply from electrical outlet before cleaning
moving parts.
• Inspect the pump outlet to ensure that no debris or hair has clogged the impeller. The
impeller can be cleaned by removing the impeller tube (9) by twisting (rotating) it (Fig. h).
• Remove any debris that has accumulated between the tracks (10) and wheels (11).
Storage
When out of the water, store TigerShark on its side in a dry, shady location at temperatures
between 40ºF - 115ºF (Fig. i).
Cable Care
With continued use, the cable may become coiled (like a telephone cord). To correct this,
lock the handle in the opposite diagonal position (Fig. b). The TigerShark will then circle the
pool in the opposite direction and uncoil the cable. Also, periodically stretching the cord out
in the sun should remove any cord twists.
Reverse handle position after each use to avoid cable coiling.
iMPortant:
The cable should be checked periodically for any external damage.