Lullaby Mini
AquateX™ Bathtub
INSTALLATION SEQUENCE continued
•
Picture 4:
the water outlet pipe should be connected.
•
Picture 5:
foot leveling lock nuts are adjusted.
•
Picture 6:
silicone is applied to the feet of the bathtub that stands on the floor.
•
Picture 7:
when the installation is completed, the bathtub is taken down from the supports
( ie 2 x 4x4's). If necessary, installation is completed by applying silicone at several points between
the bottom panel and floor.
Compatible adaptors for adapting a threaded male connection to a solvent weld connection:
•
Mueller Industries: Part # 05913
Or
•
Nibco: C4803
http://www.homedepot.com/p/NIBCO-1-1-2-in-PVC-DWV-Hub-x-FIPT-Female-Adapter-C4803HD112/100677994
The adaptor must have the appropriate thread type or it will keep slipping and you will not be able to get
a tight connection!
Male Adapter S
pg x MI
PT - ABS DWV
for Aquati
ca
®
bath wastes wi
th
Sch40 hub outlet.
Thread: 1 ½ NPSM (1 ½ I
PS)
4
5
7
6
Use Male Adapter
Spg x MIPT
- ABS DWV for Aquatica
®
bath wastes with
Sch40 Waste Fitting
Thread 1
½
NPSM
(1
½
IPS)
Please refer to our
kit installation guide
on page 6
