18
Aquatic Industries, Inc.
OPERATION of
MILLENNIUM SERIES
UNIVERSAL REMOTE CONTROL:
PROGRAMMING DEVICE CONTROL:
The Universal Remote can control up to four different devices. Carry out the following instructions for each device
you want to control.
TV
0047
RCA
VCR
0060
RCA
AUX
1023
Pioneer
MODE
CODE
TV
Code for TV
VIDEO
Code for DVD, VCR, Audio
Cassette, LDP, DAT
AUX
Code for Amplifier, Tuner, Misc.
Audio, CD, Home Automation
BATH
Code for the Bath
(0420)
Default setup code numbers:
Write down your setup code numbers in
the chart below, for future reference.
TV
VCR
AUX
BATH
Note:
The code for your Sony CDX-
C6750 or CDX-C5000 Radio / CD
is
0179
.
0 4 2
0
1. Turn on a device (e.g., VCR) and, if applicable, insert
media (e.g. video cassette).
Note:
Please read steps 2-4 completely before proceeding.
We recommend highlighting the codes and device you
wish to program before moving on to step 2.
2. On the remote control, press mode key once
(i.e.,
tv
,
video
,
aux
or
bath
). Press and hold
setup
until
LED blinks twice, then release key.
3. Use the Code Table (pages 32-36) to locate brand name
and type of device. Then, enter the four-digit code for
your device. If performed correctly, the LED will blink
twice. Remember to press and hold
shift
key first to
access numbers (
0-9
).
Note:
If LED did not blink twice, then repeat steps 2-3 and try
entering the same code again.
4. Aim remote control at device and press
Power
once. It
should turn off. If it does not respond, repeat steps
2-3, trying each code for your brand until you find one
that works. If it still does not work, try searching for the
code (see Searching For Your Code, page 19).
5. Repeat steps 1-4 for each device you want the
Universal Remote to control.
