Aquatic 25
Serenity Owner's Manual & Installation Guide
INSTALLATION INSTRUCTIONS
NON-FREESTANDING MODELS
REMOTE CONTROL OPTION (NON-FREESTANDING)
Receiver Module and remote may be used in conjunction with supplied keypad or without.
Receiver Module Installation
The receiver module must be installed under the bathtub rim as shown in Figure 7A.
IMPORTANT:
• In order to obtain the best reception possible, we recommend not to
install the receiver module next to the faucets or metal piping.
• Location of the receiver module must be easily accessible from
the outside of the bathtub for maintenance.
Remote Control and Keypad
Used to Activate the System
1. Plug in the cable as shown in Figure 7B.
2. Once everything is connected, the remote control
is ready for synchronization.
Synchronization
1. Once the system has been connected, the remote control must be synchronized with its receiver module.
2. Switch off the main breaker or unplug the system and switch it on again.
3. From this moment you have 15 seconds to proceed with the synchronization.
4. Press simultaneously on buttons 1 & 2 of the remote for 4 seconds as shown in Figure 8.
5. The remote control is now synchronized and ready for use.
6. If the synchronization is not successful the first time, you should resynchronize,
starting from step 2.
Module and keypad
are factory installed
RECEIVER
MODULE
KEYPAD
REMOTE CONTROL
BLOWER OR
ELECTRONIC CONTROL
DISPL AY
OR
RECEIVER
MODULE
Figure 7A
Figure 7B
Figure 8