1. A mounting template is included. Aquatic AV
recommends using the ‘measure twice, cut once’
method.
2. Once the mounting hole is complete, make
sure the outside surface is clean and clear of
debris. The Digital Media Locker has an external
water/dust proof gasket, but this requires a clean
and flat surface for best performance.
3. The Digital Media Locker has six (6) front
screws. Drive the screws using a screw driver.
During final mounting, apply equal pressure
to all points for the best water/dust outer seal
performance. make sure screws are snug and do
not over tighten.
4. Review all outside surfaces of the Digital Me-
dia Locker to ensure proper water/dust seal. This
is important for long term environmental protec-
tion performance for your digital media device.
1.4. Mounting the Digital Media Locker™
196.5mm
120mm
65mm
26mm
1.5 Bluetooth Antenna Installation
1. Screw on the provided Bluetooth Antenna,
avoiding bending the cable at a 90° angle.
2. Install the Bluetooth antenna as high as
possible, above the waterline of the spa if possible,
and making sure the arrow is pointing directly
upwards towards the sky to ensure the Bluetooth
range is maximized. If there is no suitable surface
to screw it in, we recommend using a good quality
double sided tape.
Getting Started
Digital Media Locker AQ-DM-6UBT
6
www.aquaticav.com
