11
©
2007-2013
Aquathin Corporation. All rights reserved.
2. Required Tools
While installing the unit, you will need:
Silicone lubricant
and
Teflon tape
for the fittings.
Other tools and pipes may be required by the installer for
soldering and cutting while fitting the unit to the water
source and drain line.
The SOFT & CLEAN System requires
water softener
salt
specifically manufactured for water softeners.
3. Planning the Installation
Review the following instructions completely before pro-
ceeding.
(See installation diagram in Appendix B)
The
Aquathin SOFT & CLEAN System is a unique two-tank
design in a single footprint that fits easily in compact
spaces.
1) Warm the valve to room temperature during cold
weather
During cold weather it is recommended that the installer
warm the main control valve to room temperature before
operating.
2) Select and prepare the location
We encourage you to establish the desired location of
each of the components before proceeding. It is recom-
mended that you install the unit near a clean and working
drain.
Be sure that the area where the SOFT & CLEAN system
will be installed is swept clean before the unit is posi-
tioned for installing to avoid puncture of the storage tank.
