Page 6
Use this diagram for a separate pool
and spa not connected, and does not
have a spill-over. Where the pool and
the spa have separate pump & filter
systems but using the same heater. If
the water pump exceeds 1.5 H.P. then
install either of the optional bypasses
as shown on page 5.
O
FF
O
FF
OF
F
OF
F
OF
F
OF
F
OFF
POOL
SPA
Plumbing & Water Connections for Pool/Spa Combinations
Use this diagram for a connected pool and spa, where the spa has a spill over type waterfall into
the pool. Where one pump and one heater is used for either the pool or the spa. If the water
pump exceeds 1.5 H.P. then install either of the optional bypasses as shown on page 5.
Plumbing & Water Connections for Separate Pool & Spa
SEE CHLORINATOR LOOP & CHECK
VALVE REQUIREMENT ON PAGE 5.
SEE CHLORINATOR LOOP & CHECK
VALVE REQUIREMENT ON PAGE 5.
