AQUATECH ECO 11000, Инструкция пользователя

Страница: 4 / 12

1 2 3 4 5 6 7 8 9
Illustration A
The impeller:
Not only to avoid interruptions, but also to ensure a large water capacity, it is important
to clean the impeller regularly. Proceed as follows (see Illustration A):
Switch off the power supply and remove the pump from the pond.
Remove the pump from the housing (pre-filter house) (see illustration B).
Loosen the 4 screws (6).
Remove the impeller housing (9) from the motor housing (1).
Remove the impeller (7) carefully from the motor housing (9).
Clean the impeller under running water with a soft brush.
Clean the impeller housing under running water with a soft brush.
Clean the pump housing carefully under running water with a soft brush.
Assemble all parts in reverse order. Ensure that the impeller is running smoothly in
the motor housing and that the gasket is mounted correctly before you fasten the 4
screws again.
Put the pump back to the pump housing and ensure that all parts and the power
cable are mounted correct. Now the 5 clips can be closed easily.
1 2 3 4 5 6 7 8 9
Illustration A
Spare parts and accessories
No Description Article No No Description Article No
1 Electromotor & housing AT001280 7 Impeller ECO 11000 AT001267
2 Nuts 4 pcs AT001282 7 Impeller ECO 14000 AT001269
3 Ceramic bearing AT001284 7 Impeller ECO 18000 AT001271
4 Gasket AT001286 7 Impeller ECO 22000 AT001273
5 Motor support AT001288 7 Impeller ECO 25000 AT001275
6 Bolts / screws 4 pcs AT001290 8 Gasket AT001292
7 Impeller ECO 3600 AT001261 9 Impeller housing 3600-11000 AT001294
7 Impeller ECO 4800 AT001263 9 Impeller housing 14000-25000 AT001296
7 Impeller ECO 7200 AT001265
Modeltype
on the pump
housing