W A T E R G A R D E N I N G T O T H E M A X
A Q U A T E C E Q U I P M E N T. C O M
SUBMERSIBLE
FILTRATION & WATERFALL PUMPS
TROUBLESHOOTING
SPARE PARTS
(NOTE: THESE ARE THE MOST USED)
Problem
Reason
Solution
Water Pump Not
Working
No Power
Check that the plug is connected
and turned on
Sponges and filter media
blocked with sludge
Clean the sponges and filters
Impellor is blocked with
sludge or limescale
Clean the Impellor as per
the instructions
Running without sufficient water
Submerse the equipment underwater
then plug in. Refill if necessary.
Blocked Impellor chamber or ceramic
shaft is broken
Clean the Impellor. Check for ware.
Replace if necessary.
Water Pump is noisy
Blockage in pump
Clear the blockage
Impellor & Shaft worn out
Replace Impellor & Shaft
Impellor broken
Replace Impellor
Water valve closed on the outlet
Open the valve and allow
water to flow
Unit inlet is blocked or the water
pump inlet is blocked
Clear all blockages
DESCRIPTION
PU3500
PU5500
PU7500
PU10500
PU12500
IMPELLOR AND SHAFT
11PD111
11PD112
11PD113
11PD114
11PD115
ELBOW BALL JOINT
11PD500
11PD500
11PD500
11PD510
11PD510
INLET AND OUTLET HOSETAIL
11PD400
11PD400
11PD400
11PD410
11PD410
PMAX PU Pumps Instructions.indd 7
26/7/17 1:03 pm
