background image

27

AQUASURE 

PREMIER SERIES

Condition that render this limited product warranty void

THIS LIMITED PRODUCT WARRANTY SHALL BE VOID IF:

1. 

The Product is not operated in compliance with normal municipal water conditions for which the 
particular model of this Product is intended.

2. 

The person seeking to invoke the warranty is not the original purchaser. That is, this Limited Product 
Warranty only extends to original purchasers.

3. 

The product is purchased used. That is, this Limited Product Warranty only covers new products.

4. 

The Product is purchased from someone other than Aquasure or one of Aquasure’s authorized 
dealers. This is because, unless the Product was sold by Aquasure or one of its authorized dealers, 
Aquasure cannot verify or guarantee the integrity or authenticity of the Product. 

 

 

      

General Conditions   

 

The warranties set forth herein are the only warranties made by Aquasure in connection with the product. 
Aquasure cannot and does not make any implied or express warranties with respect to the product, and 
disclaims all other warranties, including, but not limited to, any warranty of merchantability or fitness for 
a particular purpose. Products sold by Aquasure are sold only to the specifications specifically set forth 
by Aquasure in writing. Other than the limited product warranty set forth herein, Aquasure makes no 
other warranties, express or implied. Aquasure’s sole obligation under this warranty shall be repair or 
replacement of a non-conforming product or parts of the product, or at the option of Aquasure, return 
of the product and a refund of the purchase price. Buyer assumes all risk whatsoever as to the result of 
the use of the product purchased, whether used singularly or in combination with any other products or 
substances.

No claim by the buyer/owner of any kind, including claims for indemnification, shall be greater in amount 
than the purchase price of the products in respect to which damages are claimed. In no event shall 
Aquasure be liable to buyer/owner in tort, contract or otherwise, for any special, indirect, incidental, 
consequential, reliance, statutory, special, punitive or exemplary damages, including, but not limited to, 
lost profits, loss of use, loss of time, inconvenience, damage to goodwill or reputation, or loss of data, 
even if advised of the possibility of such damages or such damages could have been reasonably foreseen, 
in connection with, arising out of, or as a result of, the sale, delivery, servicing, use or loss of use of the 
products sold hereunder, or for any liability of buyer to any third party with respect thereto.

Obtaining Warranty Coverage or General Inquiries

If coverage is available, you may obtain coverage under this Limited Product Warranty by providing 
Aquasure with proof of original purchase, and that you are the original purchaser. For service under 
this Limited Product Warranty, you must notify Aquasure by phone at 1-800-661-0680, by email at 
[email protected], or in writing at 818 N. Mountain Ave. Suite 203 C, Upland CA 91786. 
In making the claim, please provide your name, address, phone number, a description of the product 
involved, and an explanation of the defect.

4. 

Damage not resulting from manufacturing defects that occur while the Product is in the original 
purchaser’s possession.

5. 

Installation of the Product with known or visible manufacturing defects at the time of installation.

6. 

Damage caused by freezing, flood, fire or Act of God. 

Содержание AS-PR100E

































Отзывы: