AquaStar StarzTruck, Руководство по установке

Страница: 6 / 22

4
STEP 3: TESTING THE FLOW
Ensure that the hose is full of water and that your pump is running. Remove the StarzTruck auto-
matic pool cleaner from the hose, then insert the flow gauge into the leader hose. Make sure the
flow gauge is underwater (see Fig. 7), and with the opposite end of the hose attached to a dedi-
cated suction or skimmer port observe the flow gauge. The optimal level is between the MAX and
MIN lines of the flow gauge. If the setting is higher than the MAX marking, it will be necessary to
reduce the flow using the regulator valve described in Step 4.
STEP 4: ADJUSTING WATER FLOW
Observe your StarzTruck automatic pool cleaner in operation at higher speed with dual or variable speed
pumps. Adjust the regulator, three-way or ball valve to speed up or slow down the cleaner (see Fig. 8).
To slow cleaner
down screwtop
outward.
(Bypass more water)
To speed cleaner up
screwtop inward.
(Bypass less water)