AquaStar StarzTruck, Руководство по установке

Страница: 12 / 22

10
STARZTRUCK AUTOMATIC POOL CLEANER SERVICE TIPS
STARZTRUCK AUTOMATIC POOL CLEANER BUMPER REPLACEMENT
Replacement of the StarzTruck automatic pool cleaner bumper is not recommended as a “do it yourself”
repair, because there is a slight possibility that the replacement might cause a problem in the propulsion
system. We strongly suggest that you consult your dealer for this repair.
A #2 phillips screwdriver is necessary for this repair.
1. Turn StarzTruck automatic pool cleaner upside down and place it in a position that is steady/firm.
2. Locate and loosen the captive screw behind the throat in the center of the bottom (Figs. 10,11,12, on Pg 6).
3. Lift the fixed access cover (see Figs. 11 & 12, Pg 6).
4. Remove four “A” screws (see Fig. 10, Pg 6).
5. Lift the lower body assembly off the StarzTruck automatic pool cleaner (see Fig. 10, Pg 6).
6. Remove four “B” screws (see Fig. 18).
7. Remove bumper carefully, do not tamper with any other cleaner parts.
9. Replace with new bumper, do not tamper with any other cleaner parts
10. Reinstall screws and parts, following steps in reverse – 6 , 5 , 4 , 3 , 2.
11. Reinstall StarzTruck automatic pool cleaner in pool per installation instructions.