Aquasound ASV1026B, Руководство по эксплуатации, Страница: 4 / 31

I. Specification
Power note:
Connect AC adapter to specified power source specification marked on product symbol, to ensure
correct connection, such as avoiding damage, pressure. Make sure to use correct socket for plug,
and to install the product by competent electrician.
Do not use any other power source besides power adapter for TV. The rest power adapter or
source can not live up to equivalent safety performance provided by Genuine Parts.
Rechargeable Battery:
1. Before using the TV at first time, recommend charge the battery fully. A charged battery unused will
still gradually lose its power over time. Charging the battery in the ambient temperature from
+5
℃（
+41
℉）
to +45
℃（
+113
℉）
Using it with a Non-AquaSound battery charger or product may
result in malfunction or accidents. for the cases, AquaSound can not be held liable.
2. Battery working time depends on different working condition and ambient temperature. In general, a
fully charged battery working time is 3 hour.
3. Turn off TV before taking out battery. Do not let battery contact metal directly, otherwise, it might
short circuit. Use the battery under its design uses.
Charging indication
：
1
．
At TV closed condition, it takes about 3 or 4 hour to recharge battery fully. During 1. charge, red
charge lamp blinks, when recharge level is up to 90% or higher, red lamp lights on. When battery
is recharged, please detach battery and unplug the charger from power outlet within 30 minutes
after the red is on. If disconnect charger from power outlet within 30 minutes, battery working time
might be extended about 5% or up to 10%.
2. Charge battery when TV is on, at the case, power will be provided by charger, meanwhile, charger
charge battery. As TV consume much current, the charging time might be extended several times
than charging battery when TV is off.
LED indication:
1. TV in the closed state, connecting charger start charging. During charging, red lamp blinks,
when battery is fully charged, red lamp lights on.
2. TV in on state, blinking green lamp stand for standby. Lighting on green lamp stand for working.
Quick alternating blinking between red lamp and green lamp stand for lower voltage of battery..
Note: press “power” on the remote controller while the machine’s on will make it into state of standby, and
the green light indicator flashes. At this state the remote controller can start the machine but machine will
consume some energy. If press “power” on the control panel while the machine’s on, all power will be shut
off. At this state the remote controller can not start the machine and machine will consume no energy so the
battery energy can be saved a long time. Make sure after you use the machine, make it at a state of power-
off.