AquaScape DIY Waterfall Kit, Инструкция по эксплуатации

Страница: 14 / 68

STEP 10
LAY PLUMBING AND DIG TRENCH
• Lay your pipe around the perimeter of the basin. The pipe will
go from the Pondless
®
Waterfall Vault to the eventual location
of the Waterfall Spillway.
• Dig a trench for your pipe or cover it with soil, rocks or mulch.
STEP 11
HOOKING UP THE PUMP AND PLUMBING
• The AquaSurge
®
pump includes a wide
assortment of fi ttings to choose from,
for this application you will be using the
Rotational Ball fi tting. The extremely
versatile Rotational Ball fi tting provides
you the ability to adjust the pump
discharge to the position
that your waterfall set-up
requires. Loosening the
threaded collar allows you
to rotate the upper half of
the ball.
• A fl at rubber washer seal
is included to ensure a
hand tight and leak-free
connection. Make sure
the fl at rubber washer is in
place before installing the
fi ttings.
Do not use tools to
install the fi ttings into
the pump discharge.
Fittings need to be only hand tight
.
14
www.aquascapeinc.com