AquaScape 45009, Инструкции и обслуживание, Страница: 4 / 20

4
☎
US (866) 877-6637 |
☎
CAN (866) 766-3426 | aquascapeinc.com
• Always operate the pump fully submerged; or if using
in-line ensure a constant source of fresh water. Failure to
do so may overheat the pump and cause it to fail, voiding
the warranty.
• Use only in fully assembled state, paying particular
attention to ensure that both the outer and inner filter
screens are attached to the pump. Failure to operate the
pump without the filter screen will allow large debris to
enter the pump and cause the pump to fail, voiding the
warranty.
• Do not wear loose clothing that may become entangled in
the impeller or other moving parts.
• Keep clear of suction and discharge openings. DO NOT
insert fingers into pump with power connected.
• Do not pump hazardous materials or liquids, such as oil,
saltwater or organic solvents.
• Do not block or restrict discharge.
• Products returned must be cleaned, sanitized, or
decontaminated, as necessary, prior to shipment to ensure
that employees will not be exposed to health hazards in
handling said material. All applicable laws and regulations
shall apply.
IMPORTANT: Aquascape, Inc. is not
responsible for losses, injury, or death
resulting from a failure to observe these safety
precautions, misuse or abuse of pumps or
equipment.
AquaSurge Pond Pump Specifications
• Input Voltage: 120V AC
• Input Frequency: 60 Hz
• Submersible pump
• For outdoor or indoor use
• Thermally protected
• This pump has been evaluated for use with water only
• Input Amps & Wattage
• Do not submerge
AquaSurge Adjustable Flow
Pond Pump directly into
the pond. The AquaSurge
Adjustable Flow Pond Pump
is designed to be placed
inside a skimmer, Pondless
®
vault, sump or basin. Please
consider the Aquascape
AquaForce
®
Solids-
Handling Pond Pump if your
application does not have a filter and requires a pump that
can be placed directly into the pond (Ex. 1).
• The AquaSurge Adjustable Flow Pond Pump is designed
to be installed horizontally on the vibration and noise
reducing rubber feet. The pump can also be mounted
vertically, if needed, by attaching the filter stand ring on the
outer filter screen, included with your pump (Ex. 2).
AquaSurge Adjustable Flow Pond Pump Specs
Model Number 2000-4000 4000-8000
Item Number 45009 45010
Average Pond Size Recommendation 2000-4000 US Gallons 4000-8000 US Gallons
Maximum Flow Rate 3,947 7,793
Maximum Head Height 18.5' 28'
Motor Type Asynchronous Asynchronous
Wattage 180 - 215* 500 - 660*
Amperage 1.82 5.5
Power Cord Length 20' 20'
Discharge Hose Diameter 1", 1.25", 1.5", 2" 1", 1.25", 1.5", 2"
Warranty 3 Year Limited 3 Year Limited
*Wattage range depending on remote control flow setting
Installation
AquaForce Pond Pump
Ex. 1
OR
Ex. 2