5 — INSTALL RO DRAIN CONNECTOR
WARNING
CAUTION
Be sure that all electrical appliances and
outlets are turned off at the circuit breaker
before working in the cabinet area.
Please wear safety
glasses to protect
eyes when drilling.
1
Identify drain outlet location. Do not install the drain connector onto the same drain pipe as
the garbage disposal. If drain-line must be installed on the same line as a garbage disposal,
do not use the drain connector included. A garbage disposal connector is recommended.
2
Remove protective cover from back of foam seal.
3
Knock center hole out, align holes, and attach to front plate of drain connector.
4
Allowing room for drilling, position the drain connector on sink drain pipe above drain trap.
5
Securely tighten nuts and screws.
6
Using the drain connector port as a drill guide, drill a 7/32" hole into the drain pipe. Be sure
not to penetrate opposite side of pipe, or to damage side of the drain port fitting.
COLD
HOT
drain pipe
bracket
new hole
Pro Tip
If there is leakage from the
drain bracket, loosen the bolts
and slide the bracket up so the
drilled hole is at the bottom of
the drain connector port.
