2
SETUP
4
OPERATION
5
Dispensing Water
First, fill the water tank and place
it back onto the dispenser dock.
Position vessel under dispenser.
Next, press and hold dock button
to dispense filtered water.
Light will illuminate blue while
dispensing water.
Finally, release dock button
once desired amount of
water is reached.
NOTE: When filling a larger (64 oz) vessel,
you may use the Quick Press function.
Quickly press the dock button once to initiate
fill. Once desired amount is reached, quickly
press dock button to stop dispensing.
NOTE: System will dispense
water for a maximum of 60
seconds at one time. Timer
will override system and shut
off pump.
Flush System
Plug your system in. Place vessel (at least
64 oz.) underneath dispenser during
flushing cycle.
To start the flush cycle, press dock
button 3 times quickly. Light will
illuminate red for 5 seconds.
While red light is illuminated, press
and hold dock button for 1 second.
Light will blink red. While system
flushes, light will change from
red to blue staying blue for 5
seconds when flush is complete.
4
NOTE: Do not drink flushed water. Discard water.
Insert Filter
Remove plastic from filter cartridge.
With top of filter up, press the filter onto
the filter chamber cap.
3
Insert the filter with the attached filter
chamber cap onto the chamber so that
the grooves of the cap line up. Twist the
filter chamber cap to the right to lock into
place. Arrow on filter chamber cap should
be pointing towards the dispenser end.
Replace the filter housing lid.
