Aquarea PAW-TE E3HI Series, Инструкция по установке и обслуживанию, Страница: 12 / 31

GB GB
1.
Table of Contents
1. Table of Contents 21
2. Important Safety Precautions 22
3. Device Information
23
3.1 Intended Use 23
3.2 Corrosion Protection 23
3.3 Construction and Fitting Dimensions / Technical Data 24
4. Installation
4.1 Regulations 29
4.2 Transport 29
4.3 Installation Site 29
4.4 Connection Diagram 29
4.5 Assembly 30
4.5.1 Heating Water Connection 30
4.5.2 Water Connection 30
4.5.3 Circulation 30
4.5.4 Potable Water Expansion Vessel 31
5. Commissioning 32
5.1 System Manufacturer Information 32
5.2 Putting Into Operation 32
5.2.1 General Information 32
5.2.2 Filling the Heater 32
5.3 Decommissioning 32
6. Maintenance 33
6.1 Sacrificial Anode 33
6.2 Draining 33
6.3 Cleaning & Decalcification 33
6.4 Recommissioning 33
7. Troubleshooting and Fault Remedy 34
8. Electric heating 35
9. Circuit diagram 36
10. Electrical connection 37
11. Spare parts list 38
12. Circuit diagrams 39
13. Warranty, Guarantee and Product Liability 40
21
Aquarea Tank
2.
Important Safety Precautions
Installation, Alteration
The heater must only be installed or altered by an approved specialist company.
The heater must only be used for heating potable water.
Operation
These operating and maintenance instructions must be observed for flawless
operation.
CAUTION! DO NOT CLOSE THE SAFETY VALVE!
Water seeps from the safety valve during the heat-up phase.
Thermal Disinfection
CAUTION! RISK OF SCALDING!
Brief operation at temperatures > 60 °C must always be monitored.
Maintenance
We recommend taking out a maintenance agreement with an approved specialist
company. The heater should be serviced at least every two years; preferably every
year.
22
Aquarea Tank