Aquarea PAW-DHWM 80-120 ZNT, Инструкция по эксплуатации

Страница: 7 / 268

7
EN
TECHNICAL CHARACTERISTICS
(*) Heating of water to 55 °C at inlet air temperature of 15 °C, 74% humidity and inlet temperature of water of
10 °C; in accordance with the EN16147 standard.
(**) Heating of water to 55 °C at inlet air temperature of 7 °C, 89% humidity and inlet temperature of water of
10 °C; in accordance with the EN16147 standard.
Type PAW-DHWM80ZNT PAW-DHWM100ZNT PAW-DHWM120ZNT
Volume [l] 80 100 120
Rated pressure [MPa (bar)] up to 1,0 (10)
Weight / Filled with water [kg] 58 / 138 62 / 162 68 / 188
Anti-corrosion protection of tank Enamelled / MG Anode
Insulation thickness [mm] 40 - 85
Degree of protection IP24
Max connected load [W] 2350
Voltage 230 V / 50 Hz
Number and power of heating elements [W] 2 x 1000
Electricity protection [A] 16
Adjusted water temperature [°C] 55
Maximum temperature (HP / el. heater) [°C] 55 / 75
Legionella control programme [°C] 70
Temperature range of installation [°C] 2 to 35
Operation zone – air [°C] - 7 to 35
Refrigerating agent R 134a
Quantity of coolant [g] 540
*Heating time A15 / W10-55 [h:min] 4:40 5:40 6:40
*Energy consumption during heating
A15 / W10-55
[kWh]
0,99 1,19 1,41
Type of measured cycle of emissions M M M
*Energy consumption in the selected cycle
of emissions A15 / W10-55
[kWh]
2,04 2,05 2,08
*COP
DHW
in the selected cycle of emissions
A15 / W10-55
3,10 3,10 3,10
**Heating time A7 / W10-55 [h:min] 5:20 6:50 8:41
**Energy consumption during heating
A7 / W10-55
[kWh]
1,12 1,43 1,78
**Energy consumption in the selected cycle
of emissions A7 / W10-55
[kWh]
2,45 2,35 2,51
**COP
DHW
in the selected cycle of emissions
A7 / W10-55
2,65 2,63 2,61
Max quantity of usable water
(min 40 °C)
[l]
90 130 142
Power in standby mode
according to EN16147
[W]
19 20 27
Sound power / Sound pressure at 1m [dB(A)] 51 / 39,5
Air connections [mm/m]
ø125 ( □ 150x70) / 15
Working Air Flow [m
3
/h] 100-230
Max acceptable pressure drop in the pipeline
(volumetric flow rate of air 100 m
3
/h) [Pa]
95