TIME AND ON/OFF PERIODS - SETTING GUIDE
Aquapower’s digital clock operates on a 24 hour system
where 00:00 is 12:00 midnight.
TO SET 24 HOUR TIME CLOCK
1. Press the view button once to display the time.
2. If the time is not current and you wish to after it, press the up or down button
once, the display will begin flashing indicating unit is in the set mode.
3. Press the up or down button while the display is flashing and the time will after.
When you have attained the correct time, waft 30 seconds or push the view
button and the unit will automatically lock the time in.
TO SET THE FOUR AVAILABLE ON/OFF PERIODS
1. Push the view button until ON1 appears, wait a moment and the correspond-
ing ON1 time will be displayed. Initially this time may read 00:00, push the UP
or DOWN button once, the display will begin to flash indicating it is in the set
mode.
2. Press the up button and adjust the time to that which you would like the pump
and chlorinator to switch on. Wait 30 seconds or push the view button and the
unit will automatically lock it in.
3. You must then set an OFF1 time. Push the view button until OFF1 appears,
wait a moment and the corresponding OFF1 time will be displayed. Initially this
time may read 00:00, push the UP or DOWN once, the display will begin to
flash indicating it is in the set mode.
4. Press the UP button to adjust the time that you would like the pump and chlori-
nator to switch off. Wait 30 seconds or push the view button and the unit will
automatically lock it in.
** If you would like the system to operate for two, three or four intervals during a
24 hour period, there is a provision to do so by selecting, ON2, OFF2 etc. and
setting a time for each.
TO VIEW ALL PROGRAMMED SETTINGS
Push the view button repeatedly to scroll through all the settings.
1.
Current time
(24Hr. clock)
2.
Percent of
Chlorine output
(Programmed value)
3.
ON1
- wait 2 seconds for the corresponding time to display
4.
OFF1
- wait 2 seconds for the corresponding time to display
5..
ON2
- wait 2 seconds for the corresponding time to display
6. Continue to view all four on/off times
Note: If the Aquapower-plus chlorinator is unplugged, or the power is
switched off, the unit will retain all the programmed settings for at least
seven days.
8
21
