Aquapeutics WG-U6811, Руководство по установке

Страница: 16 / 23

(
2
)
Instruction for use
After stratup the default location of cursor would be .Rotate the
shuttle switch to move the cursor.After the cursor moves to a function,press the
shuttle switch or the function keys on the remote control to quickly turn on and
turn off the function.The icons would light up after functions are turned on and
vanish after functions are turned off.
(
3
)
、
operating instruction
1. Setting of steam function, temperature and duration
①
. Move the cursor to ,press the shuttle switch or momently press
on remote control to start the steam bath function. After startup, the icon
would light up. would flash for shortage of water. Press the shuttle switch or
on remote control again to turn off the steam function. After the steam function
is turned on,the steam machine would shut down automatically as the steam
temperature reaches the set value and reopens as the steam temperature falls below
the set value.
②
. The default steam temperature is 45
℃
and the default duration is 45min.
③
Setting of steam bath temperature: After turning on the steam machine,
move the cursor to , press the shuttle switch or momently press on
remote control to enter the temperature setting mode. As the icon flashes, rotate
the shuttle switch to adjust the temperature or press on the remote control to
raise the temperature or to lower the temperature. Temperature setting
range: 25 ~ 60
℃
④
setting of duration: After turning on the steam machine, move the cursor
to ,press the shuttle switch or momently press on remote control to
enter the temperature setting mode, .
Operation instruction of S198E system
15