Aquapeutics Caribbean, Руководство по установке

Страница: 3 / 17

2
1. Technical parameters & package information
1.2
Package information
1. Upon the arrival of your Aquapeutics spa take care to make a thorough inspection for any visible damage to the
shipping container. Visible damage should be reported to your carrier immediately. All SHIPPING DAMAGE should
be noted on the assigned shipping document.
2. It is recommended that all rough plumbing and electrical work be completed before the assembly of your
Caribbean begins.
3. At least two people are required to lift the larger pieces into position during installation.
4. Tools
：
Wooden mallet open end wrench level Tape measure Screwdriver Pencil 4mm Hex wrench
Electrical data Dimensions (inches)
N.W
capacity
Circuits Power frequency Length Width Height
1@ 110V 11.8 amps
1 @ 220V 13.6
amps
1300W
and
3000W
50~60Hz
63.8 63.8 87 390 lbs 40 Gal
Please note: If you have
purchased a Tub with the
additional heater option it
is very important to
understand that the
electrical requirements for
your unit have changed.
The heater requires a
second separate electrical
circuit that can supply 13
amps at 110 volts with GFI
in addition to what your
tub had originally needed.
Installation instructions for
your optional heater are in
the installation section of
this manual.