2/9
Content
I. Introduction
II. Safety instruction
III. Announcements before use
IV. Maintenance
V. Working principles of the product
VI. Product characteristics
VII. Instructions for use
VIII. Product's technical parameters
IX
．
Problems indication
X. Electrical diagrams
XI
．
Packing list
I. Introduction
Thanks for purchasing the atmospheric water generator. We have been adhering to the philosophy to design this product: i.e.
producing maximum high quality drinking water with minimum energy consumption. When the product external is connected with
the municipal water, the product can be used as the water purifier, which gives the product a dual function machine.
II. Safety instruction
1. The socket grounding shall be safe and reliable.
2. Do not remove the grounding terminal out from the power line.
3. Neither external plugs nor external power adapters shall be used.
4. The product shall be far away from toxic gas and liquid.
5. Do not use any worn power cords or plugs.
6. Unplug the power cord before maintenance.
7. The product shall not share a socket with other electrical equipments with high power consumption.
8. Replace components correctly with the corresponding ones suggested by the manufacturer.
9. Do not unplug live plugs with wet hands.
10. When moving this product, please pull out the power plug and empty all the water tanks with the tilt angle not over 20°during
moving.
11. The appliance must not be immersed.
12. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
13. This appliance is intended to be used in household and similar applications such as
– staff kitchen areas in shops, offices and other working environments; farm houses and by clients in hotels, motels and other
residential type environments;
– bed and breakfast type environments; catering and similar non-retail applications.
15. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order
to avoid a hazard.
III. Announcements before use
1. Do not place the machine too close to the wall, and keep the product 20 cm away from the wall for its best performance.
2. The product shall not be used outdoor.
3. Keep out of the direct sun.
4. The product shall be placed stably during operation.
5. Working voltage shall not be lower than 90% of rated voltage. Otherwise, the product will generate unusual noise and heat
excessively. If this happens, cut off the power immediately until the voltage returns to be normal.
