Aqualytic AL400T-WL, Инструкция по эксплуатации, Страница: 17 / 32

17
AL400T-WL_2a 07/2011
Place the vial in the sample chamber making sure that the
positioning is correct, with the marks are aligned
.
Index the cuvette by pressing and holding down the [ ] key
while rotating the cuvette to identify the lowest reading (the
displayed turbidity is continuously updated on the display).
Once the cuvette is indexed, release the [ ] key to display
the measured turbidity (see chapter 2.3.3.5 Indexing single
sample vials).
The result is shown in the display in NTU.
Remove the vial and clean it.
1.00 NTU