Rise
™
Installation Guide 21
10
Drill and prepare 2 holes between 550mm (minimum) and 805mm (maximum) apart using the
fixings provided, (if suitable).
The top rail bracket can be adjusted to suit existing screw holes in the finished wall by
sliding the bracket up or down the rail to suit the required position.
•
!
11
Pass the rail through the Aqualisa Pinch Grip
™
holder
while keeping
the slider levers depressed.
12
Carefully slide the gel hook onto the rail under the Aqualisa Pinch Grip
™
holder
.
Current Water Supply Regulations state that the handset should not be allowed to pass
a point 25mm above the spill over level of the bath or shower tray. If this cannot be
achieved, the hose must be passed through the gel hook which has been designed to be
utilised as a hose restraint.
•
!
13
Fix the top rail bracket into position using the screws provided,
if suitable.
14
Slide the rail assembly up through the top rail fixing bracket and
temporarily support whilst fixing the bottom bracket.
