Quartz Digital exposed with adjustable head
installation instructions
Page 7
Installation instructions
This product must be installed by a competent person in accordance with the
relevant Water Supply Regulations.
In addition to the guide below, it is essential that the written instructions
overleaf are read and understood and that you have all the necessary
components (shown overleaf) before commencing installation.
The Quartz Digital shower system is supplied with universal fixings intended
to secure it to a suitable wall.
!
!
90mm
445m
m
270m
m
350mm
265m
m
70mm
To ensure safe operation and installation of this product, the processor MUST be
installed in one of the orientations shown.
1
Isolation valves are supplied with the Digital
processor and must be fitted on both inlets and
the blended water outlet. All pipe work should
be run in 15mm pipe. All pipe work should be
supported. For externally pumped gravity fed
installations, 22mm pipe work should be run
as close to the processor as possible before
reducing down to 15mm.
2
The inlet supply centres are 48mm. The inlet supply centres deviate from
EN1111 and EN1287, but are deemed to be a special case. Please note arrow
on isolation valve to indicate direction of flow.
Compression fittings should not be used on the inlet and outlet spigots and
may affect the warranty if fitted.
!
!
