Quartz Digital exposed with adjustable head
installation instructions
Page 15
Run the shower at maximum temperature
(factory pre set to 45°C). If required, maximum
temperature adjustment can be made with
a flat bladed screwdriver using the ‘MAX TEMP
ADJUSTMENT’ control as indicated. When the
temperature has been set to the desired
position, carefully replace the Digital processor
lid and secure the fixing hand tight only.
28
Site conditions can affect temperature settings, installer to adjust as required.
ALL COPPER PIPE WORK MUST BE CROSS-BONDED AND CONNECTED TO
A RELIABLE EARTHING POINT.
!
Re-instate the electricity supply to the Digital processor. Press the ‘Start/stop’
button on the controller to turn the shower on.
27
