Pull the data cable through
before securing the back plate to
the wall using suitable no. 8 non
rusting countersunk screws.
4
Push the data cable plug into the
back of the button fully home to
ensure a water tight seal making
sure the seal is no longer visible.
5
iSys Digital remote control
installation instructions
Page 7
Prepare a suitable route and install the 10m low voltage data
cable leaving a working end of at least 70mm including the
connector plug. The end of the data cable closest to the
processor should terminate at a maximum of 500mm from
the processor to allow for connection to the data cable
connection block.
3
DATA CABLES MUST BE PROTECTED BY SUITABLE SHEATHING OR
CONDUIT IN THE EVENT OF SERVICING AND MAINTENANCE.
!
