iSys Digital remote control
installation instructions
Page 13
To release the button, insert a small
flat bladed screw driver into the
small slot at the bottom of the
button assembly, to release the
locking clip, taking care to avoid
damaging the plated surface.
Carefully lift the button out and
up off of the back plate top
locating peg.
!
BEFORE ANY ELECTRICAL ADJUSTMENT IS ATTEMPTED, THE
ELECTRICITY SUPPLY MUST BE TURNED OFF AT THE MAINS
SWITCH.
ELECTRICAL INSTALLATION MAY ONLY BE CARRIED OUT BY
A QUALIFIED PERSON.
!
Plug one end of the 2m data
cable (supplied with the Digital
Diverter) into the open entry port
of the main processor box.
8
Plug the other end of the 2m
data cable (supplied with the
Digital Diverter) into
port 2
on the Digital Diverter.
9
