Aqualisa ilux Digital Bath, Инструкция пользователя

Страница: 18 / 24

ilux Digital Bath with diverter – manual operation
The bath can be operated either manually or once set, via the pre-set buttons.
To operate the bath manually follow the procedure below.
1. Press the Start/Stop button, the bath will start in the default outlet
with flow and temperature as per previous use.
To divert to alternative outlet while bathing, push and hold for 1.5
seconds to operate alternative outlet. Push and hold again to
revert back.
2. Rotate the temperature control to the desired position. The small red
or blue temperature LEDs will flash while adjusting, the white LEDs
remain solid, with more or less illuminating, to indicate the selected
temperature position set by the rotary temperature control dial.
3. Rotate the flow control to the desired position. The LEDs will
remain constantly lit, with more or less lights illuminating depending
on where the flow rate is positioned. On a lesser flow rate, less lights
will illuminate, on a greater flow rate more lights will illuminate.
The green LED will illuminate when set to ‘ECO’ flow rate.
4. Put the plug in.
5. Press the Start/Stop button to finish bath fill.
18
ilux LAVINGTON User revisedv2.qxd:Layout 1 21/11/12 11:57 Page 18