ilux Digital Bath remote control
ilux Digital bath remote control is fully mobile and can be removed from the fixing cradle to
a more convenient location, operating up to 10m from the Digital bath control. The remote
control is water resistant though full submersion in water should be avoided.
1. Ensure the plug is engaged.
2. To operate the bath in manual mode, press the Start/Stop button
on the remote.
3. Once set at the controller, start the bath using the pre-set buttons
by pressing the desired pre-set.
To prevent accidental overfilling, once a bath has been filled
using the pre-set function the controller pre-set buttons will be
disabled for 1 minute. The controls will still operate manually
if required.
4. Whilst bathing, press the Hot Top Up button to provide a top up
of maximum temperature at minimum flow of blended water, this
will run for 1 minute before shutting off automatically.
5. Alternatively, press the Start/Stop button to finish the Hot Top Up flow.
When the remote battery power is running low, the green Eco flow setting LED
on the bath control will glow red.
Seasonal inlet temperature change may not offer a significant increase in bath
flow rate.
Bath flow rate may vary, therefore affecting bath pre-set depth. Consideration should be
given to Winter and Summer flow rates.
ilux Digital Bath remote control
12
ilux LAVINGTON User revisedv2.qxd:Layout 1 21/11/12 11:53 Page 12
Содержание ilux Digital Bath
Страница 1: ...ilux Digital User instructions ilux...
Страница 2: ......
Страница 23: ...Notes 23...