HiQu Digital Concealed
installation instructions
Page 9
Run a pipe from the mixed water outlet on the Digital processor
through the wall to the proposed siting for the shower outlet.
7
Drill and prepare the fixing points and 15mm data cable entry point
using the fixings provided, if suitable.
10
Undo the fixing screw, remove the
controller assembly away from the
back plate and set aside.
8
Place the shower control back plate onto the finished wall surface in
the desired location and mark the fixing and data cable entry
points.
9
Attach the supply pipes to the
Digital processor, ensuring that the
cold and hot feeds are fitted into
the appropriately marked inlets.
6
DO NOT SOLDER NEAR TO PLASTIC COMPONENTS.
!
Care should be taken to ensure the mounting holes do not pierce
the data cable conduit.
!
