Aqualisa CENTRAL Series, Инструкция по установке и эксплуатации

Страница: 10 / 20

10
SMALL PILLAR TAP INSTALLATION
In addition to the guide below it is essential that the important
information section is read and understood and that you
have all the necessary components before commencing
installation. Failure to install the product in accordance with
these instructions may adversely affect the guarantee terms
and conditions. Do not undertake any part of this installation
unless you are competent to do so. Prior to starting, ensure
that you are familiar with the necessary plumbing regulations
required to install the product correctly and safely.
1
Place the fixing bolts (2) into the tap body and secure using a
screwdriver in the machined slot.
2
Offer the cover plate (3) to the bottom of the tap body.
3
Screw the flexible hoses (5) into the tap body (see Fig.1 page 11), feed
through the hole in the mounting surface and offer the mixer tap into
position.
4
Feed the fixing washer (6) and fixing plate (7) onto the fixing bolts and
secure to the underside of the mounting surface using a suitable tool.
Ensure correct alignment of the mixer tap over the basin.
5
Connect the flexible hoses to the supply inlets ensuring washers are
fitted and tighten firmly.